powersoft S Series Operation & User’s Manual

7, Controls Input attenuators The six inputs attenuator controls, located on the front panel adjust gain for their respective amplifier channels in all modes. With the attenuator fully clockwise (minimum attenuation) the amplifier gain will be set to 32dB ( 40X ). The division of the scale…

5, Introduction Powersoft is a leading company in the field of high efficiency audio power management. The totally new Powersoft’s DIGAM (DIGital AMplifier) technology has changed the way the world looks at professional audio amplification. No other amplifiers come close for applications dem…

9, DC fault protection If DC or excessive subsonic energy appears at a channel output, an instantaneous protection circuit will inhibit the power supply for all channels. Power supply shutdown is used in lie of speaker relays, thereby improving the damping factor and reliability of the DI…

2, powersoft S Series E POWERSOFT ENGLISH – 1 Table of Contents IMPORTANT ......................................................................................................................................................................................... 2 WARNING NOTICES ................…

4, Safety rules This device must be powered exclusively by earth connected mains sockets in electrical networks compliant to the IEC 364 or similar rules. Is absolutely necessary to verify this fundamental requirement of safety and, in case of doubt, require an accurate check by a qualified …

11, S - Series specifications General Type Digital amplifier for professional applications Power requirements: 115-230Vac 50-60Hz +15/-15% Power factor cos(ϕ) More than 0.95 from 200W to full power Operating temperature 0°C ÷ +45°C Weight 13,7 kg External dimensions Standard rack …