Spyder Robotics Herpstat 1 Operation & User’s Manual

1, Herpstat 1 & Herpstat 2 User’s Manual www.spyderrobotics.com Thank you for choosing the Herpstat digital proportional thermostat. This product offers the following features: • Proportional heating constantly monitors and adjusts amount of heat necessary to mai…

2, About this User's Manual This manual covers both the Herpstat 1 and Herpstat 2 products. The Herpstat 2 essentially adds a second output and probe with its own independent primary settings. What's new in this Herpstat? The Herpstat line of thermostats has a reput…

3, (System Setup continued...) Display Type: This setting adjusts whether to display temperature in Celsius or Fahrenheit. Enable System Sounds: Enables or disabled the system beep during menu selection. Does not affect audible alerts. Master Reset: Selecting this will reset all s…

4, (Output Setup for Lighting Control continued...) Output Mode: (Lights ON/OFF, Lights Dimming) Note: When the Mode is changed all settings for selected output will be set to the defaults for that particular mode. Select the Output Mode option and set it to either Lighting (ON/OFF) or Ligh…

5, Spyder Robotics Herpstat 1 Security Passcode From the initial menu screen select Security Passcode using the Plus and Minus button and press Enter. This setting creates a 4-digit Passcode that is required to be entered before menu access is granted. Use the Plus and Minus buttons to toggle the i…

6, (Getting the most out of your Herpstat continued...) Should the device not work as expected it's possible one of the menu settings was set incorrectly. It may be easier to reset the device to its factory default settings than to figure out which setting is causing the issue. T…