Speedtouch 605(s) Reference Manual

511, MBUS Commands E-DOC-CTC-20060414-0007 v1.0 489 mbus client config Modify client parameters. SYNTAX: where: RELATED COMMANDS: mbus client config [writelock = <{enabled | disabled}>] [wlgetimeout = <number>] [wlidletimeout = <number>] [path = <quoted string>] [type = <…

558, NAT Commands E-DOC-CTC-20060414-0007 v1.0 536 nat maplist Display the address mapping for a NAT enabled interface. SYNTAX: where: EXAMPLE: RELATED COMMANDS: nat maplist [intf = <string>] [expand = <{disabled | enabled}>] intf The IP interface name. Note If not specified, the address m…

20, Contents E-DOC-CTC-20060414-0007 v1.0 xvi Syslog Commands..................................................................................... 649 syslog config............................................................................................................................................…

302, Eth Commands E-DOC-CTC-20060414-0007 v1.0 280 eth switch mirror egress Enable or disable the specified port to be the Mirror Egress Port. SYNTAX: where: EXAMPLE: Here port 1 is enabled as Mirror Egress Port Here port 1 is disabled as Mirror Egress Port RELATED COMMANDS: Only one port can be…

305, Speedtouch 605(s) Eth Commands E-DOC-CTC-20060414-0007 v1.0 283 eth switch share delete Delete a shared port. SYNTAX: where: RELATED COMMANDS: eth switch share delete port = <number{1-4}> shared = <number{1-4}> port A number between 1 and 4. Represents the port. REQUIRED shared A number bet…

47, ATM Commands E-DOC-CTC-20060414-0007 v1.0 25 atm bundle config Modify a bundle of interfaces. SYNTAX: where: EXAMPLE: The bundle of interfaces to be configured must not be connected at the time of configuration. If this should be the case, use the command :atm bundle detach before u…