Poise Technology AG-188 Operation & User’s Manual

49, AG-188 User Manual 49 / 53 8 POST Mode(safe mode) AG-188 provide safe mode. When there is booting problem because of setting problem or firmware problem. User can restore the factory setting or upgrade to a new firmware to solve this problem. How to enter safe mode? In the AG-188 …

17, AG-188 User Manual 17 / 53 1.5.3 Net Service HTTP Port: configure HTTP transfer port, default is 80.User may change this port to enhance system’s security. When this port is changed, please use http://xxx.xxx.xxx.xxx:xxxx/ to reconnect. Telnet Port: configure telnet tr…

23, Poise Technology AG-188 AG-188 User Manual 23 / 53 1.5.7 Digital Map Digit map is a set of rules to determine when the user has finished dialing. AG-188 support below digital map: Digital Map is based on some rules to judge when user end their dialing and send the number to the server. AG-188 …

35, AG-188 User Manual 35 / 53 4 Telnet Console 4.1 Introduce 4.1.1 Basic structure User may use telnet command to access and manage gateway. AG-188 adopts tree structure for telnet. Every node contains its sub-nodes or local command. User can type “help” or “?” whenever to…

41, AG-188 User Manual 41 / 53 ¾ PPPoE settings path: <config-pppoe># PPPoE account settings ---auth –user xxx -password xxx Example:<config-pppoe>#auth –user aaa –password 123456 [disable]enable service settings ---[no]…

40, AG-188 User Manual 40 / 53 ---entry –number xxx –ip x.x.x.x –protocol xxx _all xxx Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _all 123( user dial 100 and gateway will sent 100 instead) Add number-IP bond and delete the prefix …