Plasmon G-Series Operator's User Manual

88, Document No. 305291-000 Revision B 8/28/01 Error Information 83 Plasmon G Series Users Guide EVENT HISTORY Allows the user to view the SCSI command event history. The information retained is an event list of SCSI commands received by the system since the history was last cleared. To reset t…

39, G Series Users Guide Plasmon 34 Major Hardware Components Document No. 305291-000 Revision B 8/28/01 G638 Slot Configuration: (two expansion bays) Looking at the system through the rear access door, the columns are from left to right starting with column 1 (far left) and the storage slots are…

66, Document No. 305291-000 Revision B 8/28/01 Config Information 61 Plasmon G Series Users Guide UNIT INFORMATION The UNIT INFORMATION menu gives the user details about the libraries slot count, drive count and firmware level. For this selection, the LCD displays: CONFIG INFORMATION…

67, Plasmon G-Series G Series Users Guide Plasmon 62 Config Information Document No. 305291-000 Revision B 8/28/01 SERIAL NUMBER Allows the user to view the SERIAL NUMBER as recorded in the NVRAM For this selection, the LCD displays: CONFIG INFORMATION *ON-LINE 2 SERIAL NUMBER OHPOHP OFPOFP ONPO…

164, Document No. 305291-000 Revision B 8/28/01 Error Codes 159 Plasmon G Series Users Guide 9 Sending parameter bytes to a drive 10 Powering off module 11 Powering on module 12 Resetting drive interface board 13 Enabling/disabling SCSI isolation board 14 Blinking drive LEDs 1…