Planet Networking & Communication IAS-2400 Operation & User’s Manual

62, Serial Port Script File Variables Eleven string variables can be used within the string above. These are used to include special characters within the string. Variable Description \a alert (normally creates a beep) \b backspace \f form feed \n new line \r carriage return \t horizon…

41, ISDN Access Server User Guide 36 Feature Required Analog Ports (Chapter 5) If you attach any device (tel, fax, etc) to either Analog Port. DHCP Server (Chapter 6) If you want to turn the DHCP server OFF, or increase the number of DHCP clients supported. (De- fault is 50, maximum is 253.) ISDN (Cha…

77, ISDN Access Server User Guide 72 1. If using static IP Addresses, ensure that your workstations IP settings are cor- rect, including IP address, default gateway and DNS. 2. Ping the ISDN Access Server. Use the “Run” command to enter the following command: Ping xxx.xxx.xxx.xxx where xx…

1, FCC Statement: This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CE Ma…

56, Serial Port Serial Port Configuration Selecting the Serial Port hyperlink will reveal a screen like the example below. Figure 22: Port Configuration Hyperlinks Click the Advanced Port link to switch to the Advanced Port screen for the serial port. (See page 54 for details.) Click the Port…

97, Planet Networking & Communication IAS-2400 ISDN Access Server User Guide 98 ISDN Access Server IAS-2410 Dimensions 245mm(W) * 140mm(D) * 40mm(H) Operating Temperature 0° C to 40° C Storage Temperature -10° C to 70° C Network Protocol: TCP/IP Network Interface: 4 * 10BaseT (UTP) connectors ISDN Port RJ45 connector, S/T inte…