Phytec FireWire-CAM-011H Manual 

34, FireWire-CAM-011H/-012H 28 © PHYTEC Messtechnik GmbH 2006 L-680e_1 The C/CS-Mount ring influences the so-called „flange focal distance“. This is the distance between the back of the lens and (the part that is attached to the camera) and the picture plane– in our …

55, Phytec FireWire-CAM-011H The Camera in Detail © PHYTEC Messtechnik GmbH 2006 L-680e_1 49 The mounting plate is attached to the camera with two screws ( Figure 40). It can be connected to any side of the camera (Figure 401). The attachment is therefore very flexible and can be easily adapted to a …

32, FireWire-CAM-011H/-012H 26 © PHYTEC Messtechnik GmbH 2006 L-680e_1 • At the end of the installation you will receive a message ( Figure 20). Click on „Finish“. Figure 20: Driver Installation, Step 3 • Now remove the FireWire cable from the camera a…

71, The Camera in Detail © PHYTEC Messtechnik GmbH 2006 L-680e_1 65 • Transmitted Light Method The transmitted-light-method (transillumination) can be very useful with transparent objects like glass. The transillumination makes the inner structures visible ( Figure 51). …

39, First Steps © PHYTEC Messtechnik GmbH 2006 L-680e_1 33 • You will then be asked to enter your license key, Figure 27: Figure 27: License Key, Step 3 • Please enter the license key „ISmvBAUUB142U“ and click on „Next“. • Follow the instructions and…

33, First Steps © PHYTEC Messtechnik GmbH 2006 L-680e_1 27 2.4 Mounting a Lens At first glance mounting a lens seems simple. However, when dealing with high-quality digital cameras, the selection of an appropriate lens and its correct mounting can play a deci…