Photon Focus MV2-D1280-640 Operation & User’s Manual

24, 4 Functionality Sequential readout By default the camera continuously delivers images as quickly as possible ("Free-running mode") in the sequential readout mode. Exposure time of the next image can only start if the readout time of the current image is finished. e x …

84, A Pinouts PIN IO Name Description 1 PW SHIELD Shield 2 O N_YD0 Negative LVDS Output, CameraLink Data Y0 3 O N_YD1 Negative LVDS Output, CameraLink Data Y1 4 O N_YD2 Negative LVDS Output, CameraLink Data Y2 5 O N_YCLK Negative LVDS Output, CameraLink Clock Y 6 O N_YD3 Negative LVDS Output, Came…

41, 4.8 Configuration Interface (CameraLink) A CameraLink camera can be controlled by the user via a RS232 compatible asynchronous serial interface. This interface is contained within the CameraLink interface as shown in Fig. 4.24 and is physically not directly accessible. Instead, the ser…

85, Photon Focus MV2-D1280-640 B Revision History Revision Date Changes 1.2 2008-07-10 Syntactic fixes, additional comments on ROI settings Added chapter "Optical Interface" 1.1 2008-05-27 Power consumption corrected. Exposure time maximum reduced to 100 ms. Added reference to F-Mount adapter. Added…

55, 6 The PFRemote Control Tool 6.1 Overview PFRemote is a graphical configuration tool for Photonfocus cameras. The latest release can be downloaded from the support area of www.photonfocus.com. All Photonfocus cameras can be either configured by PFRemote, or they can be programmed with custom s…

72, 7 Graphical User Interface (GUI) 7.1.6 Info This panel shows camera specific information such as type code, serial number and firmware revision of the FPGA and microcontroller and the description of the camera interface. Figure 7.8: MV2-D1280-640 info panel Typecode: Type code of …