DFI NP900-B16C Operation & User’s Manual

75, 75 4 Supported Software The CD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Insert the CD into a CD-ROM drive. The autorun screen (Mainboard Utility CD) will appear. If after inserting the…

25, DFI NP900-B16C 25 2 Hardware Installation Heatspreader on NP900-B16C (top view) Heatspreader Bottom View of the Heatspreader • "1" to "5" denote the locations of the thermal pads designed to contact the corresponding compo- nents that are on NP900-B16C. • Remove the plastic covering from …

118, 118 A Watchdog Timer Appendix A - Watchdog Timer Watchdog Timer The following parameters are references for setting the time interval of the Watchdog Timer function. The system will regularly be “cleared” according to the set time interval. If the system hangs or fails to function, it w…

112, 112 4 Supported Software 1. Setup is now ready to install the utility. Click Next. 2. Read the Warning infor- mation carefully then click Next. Intel Matrix Storage Manager Utility Intel Matrix Storage Manager is a utility that allows you to monitor the current status of the SATA drives.…

17, 17 2 Hardware Installation Connectors COM Express Connectors The COM Express connectors are used to interface the NP900- B16C COM Express board to a carrier board. Connect the COM Express connectors, lcoated on the solder side of the board, to the COM Express connectors on the carrier board. Refer…