JAI RM-2040GE Series Operation & User’s Manual

29, Functions & Operations 27 RM/TM-2040GE Series 4 Function & Operations 4.1 GigE Vision Standard Interface The TM-2040GE cameras are designed in accordance with the GigE Vision standard. Digital images are transmitted over Cat5e or Cat6 Ethernet cables. All c…

37, JAI RM-2040GE Series Configuring the Camera 35 RM/TM-2040GE Series AcquisitionStart: tells the camera to start acquiring images in the mode as specified by AcquisitionMode. This also tells the camera to send one more image while in SingleFrameReadout. AcquisitionStop: tells the camera…

45, Configuring the Camera 43 RM/TM-2040GE Series 9. Set GevPersistentDefaultGateway to the IP Address of your gateway. (Ex: 0.0.0.0) Figure 27. GigEVisionTransportLayer Persistent IP 5.8.2 Stream Channel Packet Size GevSCPSPacketSize: Images are sent via the S…

25, Operation 23 RM/TM-2040GE Series 3.5.5 Particle Imaging Velocimetry Fixed Exposure Mode In Particle Imaging Velocimetry (PIV) Fixed Exposure Mode, when an external trigger is applied, the first time exposure starts the same as in PWC mode. It lasts a very short perio…

54, RM/TM-2040GE Series 52 Configuring the Camera • PLC_Q17_LevelHigh: increment when the signal is at the High section. • PLC_Q17_LevelLow: increment when the signal is at the Low section. CounterResetActivation: select the signal event type that will reset the counter. The c…

48, RM/TM-2040GE Series 46 Configuring the Camera Here are the possible input signals into the PLC: Signal Source Signal Name / Input Pin Description 12 Pin External_Trigger_In_Pin6 External trigger signal. 12 Pin External_VD_In_Pin7 External vertical drive sign…