Gamma 600 Owner's Manual

4, 3 ASSEMBLY INSTRUCTIONS Installing the Turntable The turntable is located under the foam packing in the bottom of the shipping carton. Insert the center post of the turntable into the bushing of the stringing machine base. Engaging the Drop Weight Bar Stop The stringing machine is shipped…

9, 8 PATHFINDER AWL The Gamma 600 includes the new Pathfinder stringing awl which creates a pathway between or around strings to make inserting a string through tight gromets easier and quicker. Insert the awl through the grommet hole in the same manner as for traditional awls. The Path…

11, 10 FIXED CLAMP OPERATION Fixed Clamp Operation The fixed clamps for the GAMMA 600 are of a dual action design. The string clamp and the clamp base operate independently of one another. To clamp a string, lift the clamp head and place the string between the jaws. Depress the clamp head lever to…

10, 9 FIXED CLAMP UPGRADE Fixed Clamp Installation To install the clamps, remove the winged lock knob to separate the knob from the lower guide bushing. Be careful not to lose the radial thrust bearing components located in the center recess of the knob. Align the clamp base with the clamp slot of …

6, Gamma 600 5 STRINGING THE FRAME The drop weight is of a two piece design. When assembled, it will accomodate ten- sions from 20 lbs. to 90 lbs. For tensions from 8 to 20 lbs., remove the 5mm bolt on the face of the drop weight, and use the smaller portion of the weight as described above. Note: Tensions abo…

1, 600 / 600FC OWNER'S MANUAL Issue 2 / Version E - Dec. 10, 1997 PROGRESSION Copyright 1997 GAMMA Sports - All Rights Reserved Provided by www.gssalliance.com …