Fantasea FRX100 III Housing Instruction Manual

20, Fantasea FRX100 III Housing FRX100 III Housing Instruction Manual 20141005 20 6. Note that once the camera built-in flash has been popped up, it can be disabled again using the Flash / Right control (page 10, no. 15) and selecting “flash disabled” on the flash mode menu. Turning the Flash Pop-Up control cl…

28, FRX100 III Housing Instruction Manual 20141005 28 FANTASEA MOISTURE DETECTOR The alarm unit of the Moisture Detector is installed inside the housing, opposite the latch dial (image #26 – item A). The Moisture Sensor unit is installed just under the camera (image #2…

14, FRX100 III Housing Instruction Manual 20141005 14 OPENING THE HOUSING 1. Pull the small red tab located at the bottom of the latch dial outwards (up and away from the housing), as indicated by the arrow direction (image #5). There is no need to apply any force. 2. Whil…

30, FRX100 III Housing Instruction Manual 20141005 30 7. Gently push the new battery it into the battery compartment and make sure it doesn’t fall off easily. WARNING Install only 3V Lithium #CR1220 batteries inside the Moisture Alarm unit. Using any other type of batteri…

3, FRX100 III Housing Instruction Manual 20141005 3 DISCLAIMER While every effort has been made in order to ensure that the information included in this instruction manual is accurate and complete, no liability will be accepted for any errors or omissions. Fantasea Line reserves the righ…