Karassn KS-200B Series Operation & User’s Manual

6,  The advantage of this function is to come true the wireless relaying emitter and decrease the system cost. For example, the users have to install 10 detectors for one floor. Usually, It need to 10 KS-200ACT detectors and 10-backup power for these detectors and AC power. If the users u…

3,  I. Introduction KS-200B computer-controlled wireless alarm system is a type of long-distance wireless alarm system, which is composed of an alarm host and 1 to 100 detectors. All these constitute a complete set of region alarm service system which can be widely used for industrial and min…

14, Karassn KS-200B Series  machines and etc. Stand off the windows. There is no barrier within the defended area of a detector. The detector should be parallel with the wall surface. (2) Installation of alarm host The alarm host should be placed on a table near a window in so far as possible. The alarm …

20,  change the telephone machine. After press # # #, if there is a rapid sound "beep---beep---". Usually, it is a wrong between the telephone machine and line socket. And cause an open circuit alarm. Please connect again. No operation within 20 seconds in the setu…

18,  key to select defense-activated state. "00" means that defense is deactivated in the defense area and "01" means that defense is activated in the defense area. It should be noted that, no matter the defense area is common defense area or emergent defense a…

9,  Alarm output interface: A set of normal open and a set of normal close alarm output and a set of uncontrolled + 12V 300mA output. Normal open, normal close alarm output interface-Label on the rear panel The alarm host provides alarm output contact loaded 1A120VAC o…