ICP Electronics ROCKY–P248SV Operation & User’s Manual

4, 2 3.10 VGA Connector ............................................................................................. 19 3.11 SCSI Connector............................................................................................. 19 4. AMI BIOS Setup ..................................…

42, 40 Appendix B. I/O Information IO Address Map I/O address Range Description 000-01F DMA Controller #1 020-021 Interrupt Controller #1, Master 040-05F 8254 timer 060-06F 8042 (Keyboard Controller) 070-07F Real time Clock, NMI (non-maskable interr…

8, 6 1.2 Package Content In addition to this User's Manual , the ROCKY-P248SV package includes the following items: • ROCKY-P248SV Single Board Computer • Serial & Parallel Ribbon Cable and Port Bracket • FDD/HDD Cable Sets • 6-pin Mini-Din to one 5-pin Mini-Din for Keyboard and …

26, ICP Electronics ROCKY–P248SV 24 4.2 Standard CMOS Setup The standard CMOS Setup is used for basic hardware system configuration. The main function is for Date/Time setting and Floppy/Hard Disk setting. Please refer to the following screen for this setup To set the Date , for example, press either the arrow or <Enter…

17, 15 3.3 Parallel Port This port is usually connected to a printer, The ROCKY-P248SV includes an on-board parallel port, accessed through a 26-pin flat-cable connector CN8. • CN8 : Parallel Port Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 STROBE# 2 DATA 0 3 DATA 1 4 DATA 2 5 DATA…

37, 35 4.10 Auto-Detect Hard Disks This option detects the parameters of an IDE hard disk drive (HDD sector, cylinder, head, etc) automatically and will put the parameters into the Standard CMOS Setup screen. Up to 4 IDE drives can be detected and the parameters will be listed in th…