ID Tech VERSAKEY Manual 

6, 1 Section 1 INTRODUCTION The ID TECH VersaKey is a full-sized, full-function keyboard with the standard enhanced layout. The 104/109-keys layout provides separate keys for the numerical pad, control, and function keys. The VersaKey has Type- matic keyboard operation with a good tactual…

7, 2 Section 2 INSTALLATION & OPERATION The VersaKey has a single cable equipped for either a USB/Keyboard or a PS/2 communication connection. Both the keyboard scan codes and the reader data are transmitted through the cable. The computer typically has only one PS/2 (standar…

14, Appendix C MAGNETIC STRIPE DATA OUTPUT FORMAT The Reader is shipped from the factory with the following magnetic stripe default settings already programmed: Magnetic Track Basic Data Output Format Track 1: <SS1><T1 Data><ES><TS> Track 2: <SS2><T2 Data…

3, FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial enviro…

12, Appendix A MAGNETIC STRIPE DEFAULT SETTINGS Function Default Value Beep Volume High Inter-Character Delay 2 ms Track Selection Any Track Data Output Format ID TECH Format (See Appendix C) Track Separator See Appendix C MSR Reading Enable Decoding Method Decoding in Both…