HCL Laptop Operation & User’s Manual

50, User's Guide Optical Drive (Cont') Eject the tray and gently pry the edge of the disc upwards at an angle to remove the disc from the hub. The emergency eject is located in a hole on the optical drive and is used to eject the optical drive tray in …

58, User's Guide Infrastructure mode The Infrastructure mode allows the Notebook PC and other wireless devices to join a wireless network created by an Access Point (AP) (sold separately) that provides a central link for wireless clients to communicate with each other or with a wired…

55, HCL Laptop User's Guide Network Connection Connect a network cable, with RJ-45 connectors on each end, to the modem/network port on the Notebook PC and the other end to a hub or switch. For 100 BASE-TX speed, your network cable must be category 5 or better (not category 3) with twisted-pai…

5, TAKING CARE OF YOUR NOTEBOOK PC To prevent possible overheating of the computer's processor, make sure you don't block the openings provided for ventilation. DO NOT press or touch the display panel. DO NOT place on uneven or unstable work surfaces. DO NOT use your notebook computer under h…

62, User's Guide Full Power Mode & Maximum Performance The Notebook PC operates in Full Power mode when the power management function is disabled by configuring Windows power management and Speed Step. When the Notebook PC is operating in Full Power Mode, the Power LED remains ON. I…

51, User's Guide Warning : If the CD disc is not properly locked onto the center hub, to CD can be damaged when the tray is closed. Always watch the CD closely while closing the tray slowly to prevent damage. A CD drive letter should be present regardless of the presence of a CD disc in…