Adam Equipment ABK Series Operation & User’s Manual

19, 18 | P a g e © Adam Equipment Company 2011 6.6 ACCUMULATED TOTAL • The scale can be set to accumulate manually by pressing the [Print/M+/Esc] key or automatically when a weight is removed from the scale. See the Section 7.3 for det…

47, © Adam Equipment Company 2011 Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonized European standards, fo llowing the provisions of the below stated directives: Electro Magnetic Co…

34, 33 | P a g e © Adam Equipment Company 2011 10.0 RELAY INTERFACE The indicator is supplied with drivers to control external relays. The drivers could be used to control a number of different relays depending upon the users need. The relay drivers ar…

24, 23 | P a g e © Adam Equipment Company 2011 7.0 USER PARAMETERS Pressing the [Func/C] key during normal operation allows the user to access the parameters for customizing the scale. The parameters are split into 4 groups- 1. Check weighing parameters, 2…

21, 20 | P a g e © Adam Equipment Company 2011 comparison to the capacity of the system. A smaller weight will show only “100%” while a larger weight might show “100.00%”. • If the scale was showing zero weight when entering this function, then the u…

3, Adam Equipment ABK Series 1 | P a g e © Adam Equipment Company 2011 CONTENTS 1.0 INTRODUCTION .................................................................................................................................. 3 2.0 SPECIFICATIONS.................................................…