Best CC34IQSB Operation & User’s Manual

5, - 5 - HOOD CONTROL REMOTE CONTROL The remote control is linked to the hood at the factory. If, for some reason, the link is lost - follow the directions below: To Link Remote Control to Hood 1. Turn off hood motor and hood lights. 2. Press P1 on the remote control for at least 3 second…

12, - 12 - CONNECT WHITE-TO-WHITE, BLACK-TO-BLACK, GREEN-TO-GROUND FIG. 16 FIG. 17 120 VAC LINE IN BOX MARKED “120VAC INPUT” 3. From the room interior, pull down both closure panels. Fig. 16. 4. Remove (4) screws from the electrical compartment access panel. Slide the panel si…

7, - 7 - PREPARE THE HOOD Unpack hood and check contents. You should receive: 1 - Range Hood Body 1 - Remote Control 6 - Grease Filters 2 - Screws, 4 x 9.5 mm 6 - Lag Bolts, 6 x 70 mm 6 - Washers 6 LAG BOLTS (6 x 70 mm) FIG. 5 REMOTE CONTROL RANGE HOOD BODY with DAMPER 6 GREAS…

15, Best CC34IQSB - 15 - SERVICE PARTS Model CC34 IQSB CAS 125 124 474 477 343 250 9 AQI IME US-CIRRUS BLDC 64 362 439 507 506 202 ARU 202 116 202 115 415 (03202288) 415 (03202288) 415 (03202288) (03292596) 415 (03202288) 415 (03202288) 415 (03202288) 415 ACR2 67 (06102601) 67A (06102598) …

9, - 9 - PREPARE THE HOOD SUPPORT 1. Construct a wood framing system as shown in Fig. 9. 2. The structure must be capable of support- ing its own weight, plus the weight of the hood (64 pounds). FIG. 9 2 x 4 FRAMING 37-1/4” 42-1/2” 14” 26-3/4” 2-5/8” 1/8” PILOT HOLE (6) 11” 11�…

13, - 13 - INSTALL THE FILTERS 1. Pull down both closure panels as shown. Fig. 19 and Fig. 20. 2. To install the grease filters, align rear filter tabs with slots in the hood. Push latch tab in, push filter into position and release. Make sure filter is securely engaged after insta…