EME Self-Monitoring Blood Glucose System Operation & User’s Manual

28, 28 Please make sure to apply blood when the blood drop appears on the display. 5. Hold the lancing device firmly against the side of your finger. Press the trigger button. Then remove the lancing device from your finger. 6. Gently squeeze and/or massage you…

38, 38 Chapter 4: Meter Memory, Setup Memory, Storing Test Results Your meter stores a maximum of 480 test results with the time and date of the test. You can review them at any time. When the memory is full, the oldest result is dropped as the latest is added, so it is very impo…

23, 23 Troubleshooting Check Action 9 Was the test strip exposed to open air for a long period of time? If yes, repeat the control test with properly stored strips. 9 Does test strip cap close tightly? Or was test strip cap left open? If the cap was not …

17, 17 Using EME Blood Glucose Test Strips  Use only with EME Blood Glucose Meters.  Run a control solution test every time you open a new box of test strips (See Chapter 2 "Control Solution Testing.")  Keep the test strips in their original bottle.  After…

7, EME Self-Monitoring Blood Glucose System Health-Related Information  If you are experiencing dehydration, frequent urination, low blood pressure, shock or hyperosmolar hyperglycemic nonketotic coma (HHNKC), you may get a test result that is lower than what your blood glucose really is. If you think you are dehydrated, call your do…

48, 48 3. Critically ill patients should not be tested with EME blood glucose meters. 4. DO NOT use during xylose absorption testing. Xylose in the blood will interfere Self-Monitoring Blood Glucose System. 5. Interfering Substances depend on the concentration. The below substances up t…