Airsight X10 P2P Manual, Setup

1, Page 1 PLEASE READ THIS FIRST X10 P2P camera setup using Airsight iPhone App Introduction You can access your camera's live video feed from your web browser or through software on your computer, your tablet, or your smartphone. To access your camera via your smartphone or tab…

5, Page 5 For LAN connection For remote viewing via the Internet For remote viewing via the Internet: If your camera does not support P2P, but you want to remotely view it, enter the Device name, and DDNS address (in the box for IP address), User name:…

3, Page 3 Touch the P2P device button. Then touch the Scan QR code icon. The App auto-opens your smartphone’s camera. Place your phone over the QR code on the bottom of the camera, when it comes into focus your phone will take a photo and the App will …

2, Page 2 Step 1: Hardware Installation You need to set up your camera using a network cable (wired) first before you attempt to use it wirelessly. Note the pictures below are for an indoor camera. The setup of an outdoor camera is similar, refer to the full Owner’s Manual for mor…

7, Airsight X10 P2P Page 7 To Operate The Camera: You can pan the image from left to right, and tilt up and down, by simply swiping your finger across or up and down the image on the screen. (Pinch to zoom on cameras that have zoom). You can take a snapshot, save the picture, and listen an…