Digital Equipment Corporation HA3000 Installation Manual

88, Digital Equipment Corporation HA3000 B–6 SPECIFICATIONS Table B–3 UPS Battery Cabinet Model Numbers Model Number kVA Rating Nominal Protection in Minutes Circuit Breaker (QF1) Rating in Amperes Width of Battery Cabinet mm/in Approx. Installed Weight kg/lbs HA32B-AH 20 5 90 800/31.5 530/1,169 HA32B-CH 20 15 90 800/31.5 530/1…

66, 4–26 INSTALLATION 4.5.1 Power Cable Connections The UPS CSA Cabinet comes in two separate versions: a cabinet with an isolation/step- down transformer (600 Vac to 208 Vac) and a CSA assembly, and a cabinet with a CSA assembly. Each of these versions has its own connection procedure. 4.5.1.1 Conne…

53, INSTALLATION 4–13 4.3.8 Reassembling the UPS Battery Cabinet Perform the following steps: 1. Push the pull-out rack assembly into the UPS Battery Cabinet. 2. Replace the two bolts that secure the pull-out rack assembly to the sides of the unit. They are located at the top left and top right si…

33, SITE PREPARATION 2–13 HA32A HA32C/D/E OR HA33D/F HA32J/K MKV-A2206-91 Figure 2–8 UPS Cabinet, UPS Auxiliary Cabinet or UPS CSA Cabinet, and UPS Distribution Cabinet Placement …

49, INSTALLATION 4–9 4.3 HA32B UPS BATTERY CABINET The UPS Battery Cabinet is shipped with the lower front and lower rear panels removed. The hardware needed to install these panels is in place. 4.3.1 General Installation The UPS Battery Cabinet is designed for use with the HA32A UPS equi…