AL-MEISTER Pluster PLS3311 Instruction Manual

20, AL-MEISTER Pluster PLS3311 AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3> 3 Place a few sheets of paper in the Feeder Tray so that the position is flush at the center of the paper and the center mark of the feeder Tray. Fix both paper guides. Make sure that the paper is touching the entrance. …

42, AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3> 5 Press [STOP] key. The display returns to the initial display. When no keys are pressed for 5 seconds, the display returns the initial display. …

58, AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3> 8．SPECIFICATIONS Model PLS3311 Processing Speed 40~120” /min (360 sheets/hour based on 12.59” x 17.71” size) Warm-Up Time 10 min. Temperature Setting 140~270°F at room temperature* Laminating Film Exclusive PLUSTER FILM, …

29, AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3> 5．CHANGE SETTINGS 5-1. SET TEMPERATURE 1 Press [TEMP./SPEED] key. This display appears. NOTE: • The default is the set temperature stored in the film. 2 Press [UP] or [DOWN] scroll key to set temperat…

40, AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3> 5 The display returns to the initial display or the warm-up display when [MODE] is pressed or no keys are pressed for 5 sec. 5-10. ADJUST BLADE READY POSITION Adjust the starting point of the blade according to the w…