Lilin PIH - 7000 Installion / Operation Manual

10, Fast Dome ID Address Setting Refer Chart Below is the address setting for camera 1~64: Up to 64 Fast Dome Camera can be serial linking in one system. Therefore each dome is addressing by ID switch located at the base of the Fast Dome. 15432 76 8 ON 1 5432 76 8 ON 1 1 2 3 45 ON 867 5432 76 8 ON ON 1…

20, GND NO NC COM 6 5 4 3 2 1 GND TXDO- TXDO+ TXDI- TXDI+ l Untighten the left knob, put the AC power cable through the hole and tighten the knob l Connect the AC power cable to AC Input jack l Connect the AC power cable(below) to AC Output jack l Connect the DC power cable(above) to DC Inpu…

7, Lilin PIH - 7000 Please read the manual before attempting installation or operation 1. Please be aware to the warnings and cautions notice. 2. Don't use any chemical detergent to clean the machine surface, use a damp cotton cloth only. Regularly clean the dome cover to assure proper focus ab…

17, l Turn the dome cover anti-clockwise l Untighten the three screws from base l Separate the dome cover from camera l Turn the camera cover anti-clockwise l Unplug the connection cable l Separate the camera body to the base l Attach base to ceiling l Base size and screw location l Tighten t…

22, l Reconnect the connection cable l Attach camera body to base l Turn camera body clockwise to high position l Tighten the three screws to fix the camera body Step 7 Attach Camera Body and Base 21 l Attach the cover to housing l Tighten the 3 screws to fix the cover l Attach the housing b…