KTI KS-1080 Installation Manual

30, -30- VLAN Global Settings Description 802.1Q Tag Aware Mode Enable - Under this mode, the switch will check the content of every received packets. For 802.1Q tagged packets, the tagged VID on the packet is used to look up the VLAN group table and find the group whose VID matches the…

19, -19- The following sections describe the VLAN processes and related settings provided by the switch. A global setting means the setting is applied to all ports of the switch. A per port setting means each port can be configured for the setting respectively. 3.2.2 Ingress Rules When a packet …

35, KTI KS-1080 -35- 4.5.3 Administrator -> PoE Settings Select [4] Administrator -> [3] PoE Settings to configure PoE function related settings: PoE Settings: [0] Print this menu [1] PoE Status [2] PoE Master Enable [3] PoE Port Enable [Q] Back Administrator Please Select(0-4).... INET>…

5, -5- 4.2 IP Menu ................................................................................................................................................. 25 4.3 SNMP Menu .................................................................................................................…

27, -27- 4.4 Port Config Select [3] Port Config to configure port configuration. Port Config Menu: [0] Print this menu [1] Port Status [2] Port Config [Q] Back Menu Please Select(0-3) Select [1] Port Status to view current port status for all ports as example below: INET> Port Status: Port Link …

33, -33- AF - <001010> <010010> <011010> <100010> and Network Control - <111000> <110000> Disable - Default DSCP classification is not applied. Select [2] QoS Other Settings to configure QoS global settings: QoS Other Settings: [0] Print this menu [1] Sho…