DITTING KE 640 Operating Instructions Manual

5, Operating instructions 64428 B 06/49 Page 5 of 18  1.3 Safety instructions The operating instructions must be kept permanently at the place of operation of the machine and if possible attached at the point of installation in the immediate vicinit…

18, Operating instructions 64428 B 06/49 Page 18 of 18  13 Certificate Ditting Maschinen AG Bramenstrasse 11 P.O. Box 241 CH-8184 Bachenbülach Switzerland Phone: +41 44 860 54 21 Fax: +41 44 860 82 38 e-mail: [email protected] www.dittingswiss.ch Sub…

15, DITTING KE 640 Operating instructions 64428 B 06/49 Page 15 of 18  10 Maintenance and repair Always pull the mains plug from the socket before carrying out maintenance or cleaning work on the device. Check the device regularly for any signs of damage, particula…

7, Operating instructions 64428 B 06/49 Page 7 of 18  3 Description 3.1 Main components and operating elements The main components and operating elements are shown in the figure. 4 Safety devices of the grinder The motor of the grinder is protected by a thermal overlo…

10, Operating instructions 64428 B 06/49 Page 10 of 18  6.1.5 Slide the filter support between the filter support mounting and the filter support rest until it comes to a stop. Push the filter support rest up and tighten the fastening screws. The setting …

12, Operating instructions 64428 B 06/49 Page 12 of 18  8 Cleaning Always pull the mains plug from the socket before carrying out maintenance or cleaning work on the device! Observe the safety instructions under 1.3! Do not let any foreign objects fall into …