Kunzle ARIES User Maintenance Manual

21, 21 ARIES User Manual_ March 2013 Edition Machine adjustment procedures Wheel adjustment (on a surface parallel to the axis of the drum) Before sanding check drum operation on the work surface. The diagram shows the two possible cases: - OK = drum and wh…

20, 20 ARIES User Manual_ March 2013 Edition Machine adjustment procedures Adjusting sanding pressure To vary drum pressure on the floor, use the adjustment knob (pos. 14 fig. E) and proceed as follows: 1. Turn the adjustment knob clockwise to decre…

22, Kunzle ARIES 22 ARIES User Manual_ March 2013 Edition Machine adjustment procedures Sawdust chamber (for the user) To keep the machine in good working condition the following items must be checked and serviced regularly: Sawdust chamber (for the user) Hoover the sawdus…

19, 19 ARIES User Manual_ March 2013 Edition Starting the machine IMPORTANT If starting the machine is difficult in winter when temperatures are very low remove the abrasive belt and start the motor, letting it idle for several minutes. Replace the belt and…

12, 12 ARIES User Manual_ March 2013 Edition Commencing operation Cables, extensions and plugs WARNING MACHINE WITH 230V ∼ 50Hz / 220V ∼ 60Hz SINGLE PHASE MOTOR For machines with a 230V~50Hz single phase motor (Europe), a HO5VV-3x2,5 mm 2…

15, 15 ARIES User Manual_ March 2013 Edition Machine specifications Abrasive belt dimensions: 750 x 203 mm Drum width: 200 mm Drum diameter: Ø 150 mm Drum speed: 50 Hz 60 Hz 2400 revs/min 2500 revs/min Motor: (A15) (A14) …