iTrust UH11-0060 Operation & User’s Manual

30, iTrust UH11-0060 III. Connect UPS communication cable 1. User may, according to actual needs, use the RS-232 cable (universal type) delivered with the UPS to connect the RS-232 port of the UPS to that of the computer, or use the dry contact cable to connect the dry contact port of the UPS to the RS-232 port of …

23, 1.5.3 Rear Panel RS-232 DRY CONTACT INTELLI GENT S LOT INPUT BREAK ERBY PASS BREAKER MAINTA IN SWITC H DRY CONTACTRS-232 INTELLIGENT SLOT BYPA SS BREAKERINPUT BREAK ER MAINTA IN SWITC H Mains switch Bypass switch Air vent Maintenance switch cover RS-232 comm port Dry contact port SN…

17, 1.5.2 LCD Panel The LCD panel consists of LCD, LED and buttons, as shown in Fig. 1-4, for the display and control of operating parameters, alarm information and function settings.  OFF  button Mains indicator  ON/SILENCE  button Fault indicator  ENTER  button Byp…

19, Including setup of Chinese/English menu, equalize charge function, temperature compensation, battery capacity, master/slave/single-unit, alternate operation period.  Chinese/English menu setup: (factory default: Chinese CHINESE ENGLISH CANCEL SET  Equalize charge setup: (factory defaul…

60,  Damage caused by power supply not in accordance with relevant electrical regulations or operation in ambient environment not in compliance with requirements; For detailed information on warranty, please see the warranty items. 4. Different levels of customized service packages are available…