GSW Water Heater Operating Instructions Manual

1, RESIDENTIAL ELECTRIC WATER HEATER INSTALLATION AND OPERATING INSTRUCTIONS Read these instructions thoroughly before starting For Brands: GSW, SpaceSaver, GSW Moffat INSTALLATION RECORD This water heater is protected by a multi-year warranty against leaks plus a one (1) year warran…

4, 1) INTRODUCTION Thank you for purchasing this water heater. Properly installed and maintained, it will provide years of trouble free service. The warranty on this water heater is in effect only when the water heater is installed and operated in accordance with these instructions. The manufa…

2, – 2 – This page intentionally left blank. May be used for notes or to record other installation information. …

12, GSW Water Heater – 12 – b. The water heater has not been installed in accordance with the applicable local plumbing and/or building code(s) and/or regulations or, in their absence, with the latest edition of the Natural Gas and Propane Installation Code, and/or the Canadian Electrical Code; or c. …

7, IV) OPERATION Temperature Adjustment The National Plumbing code requires that the temperature of residential electric service water heaters be set at 60°C (140°F) (Canada), 49°C (120°F) (U.S.A.). The maximum outlet temperature of some bath fixtures must be tempered to 49°C (120°F) to reduce r…

9, Water Is Too Hot Adjust the thermostats to a lower setting. See “Temperature Adjustment” section. It is imperative that the thermostat is flush against the tank. See “Thermostat Replacement” sec- tion. Hot Water Odour On occasion, and depending on your location, hot water may develop a …