Russell Corporation M867SF12 Owner's Manual

16, 16 ID# M867SF12 08/06 17. Regulation height is 10 feet. 10 feet (3.05 m) READ AND UNDERSTAND WARNINGS LABELS BEFORE USING THIS UNIT. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. WARNING! Check system leveling. Pole (1) should be level in all directions…

8, 8 ID# M867SF12 08/06 Rest top of pole (1) on a piece of scrap wood (not included) and line up holes in pole to holes in mounting plate (2) as shown. 7A. 22 23 1 PLAYING SURFACE 2 Insert bolt (23) through holes in plate and pole and secure with nut (22). 7B. PLAYING SURFACE SCRAP WOOD (NOT…

3, Russell Corporation M867SF12 Item Qty. Part No. Description 1 1 858861 Pole 2 1 898850 Plate, Anchor, Black 3 1 Rim Assembly 4 1 Net 5 4 203017 Nut, Hex, 3/8-16 6 4 203300 Washer, Locking, 3/8 7 4 200512 Bolt, Hex, Tap, 3/8-16 x 3.5” Long 8 1 204923 Pin, Cotter, #8 9 1 204921 Washer, Barrel 10 4* 203309 Washer, Flat, …

9, 9 08/06 ID# M867SF12 THREE PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! 8. TWO people are required to lift pole into position so that the threaded assembly rod (14) can be installed and secured by the THIRD p…

17, 17 08/06 ID# M867SF12 Subject to proper installation and normal use, Spalding ® warrants, subject to limitations below, to the original retail purchaser all structural components of the Spalding ® system to be free of defects in material and workmanship for the duration of owne…

4, 4 ID# M867SF12 08/06 Item #13 (1) Item #5 (4) Item #9 (1) Item #16 (4) Item #24 (9) Item #21 (24) Item #7 (2) Item #25 (12) Item #22 (13) HARDWARE IDENTIFIER (OTHER - NOT ACTUAL SIZE) Item #8 (1) HARDWARE IDENTIFIER (NUTS, WASHERS & SPACERS) Item #23 (1) HARDWARE IDENTIFIER (B…