Comtech EF Data MBT-4000B Installation And Operation Manual

57, Multi-Band Transceiver System Revision 0 Remote Command MN/MBT4000B.IOM A-21 Parameter Type Command (Instruction Code and qualifier) Valid on MBT, BDC, or BUC Arguments for Command or Response to Query Description of arguments (Note that all arguments are ASCII numeric…

17, Multi-Band Transceiver System Revision 0 Introduction MN/MBT4000B.IOM 1-5 1.3 SYSTEM OVERVIEW The transceiver is constructed in a modular configuration. Common to the configuration for any frequency band of operation is a base module, which provides the M&C, Power Supply, and…

27, 3-3 Multi-Band Transceiver System Revision 0 System Operation MN/MBT4000B.IOM 3.3 LO, MIX AND SPECTRUM SETTINGS (LNB) 3.3.1 C-BAND Table 3-1. For C-Band: LO and MIX Information for Demodulato…

4, Comtech EF Data MBT-4000B ii CUSTOMER SUPPORT Contact the Comtech EF Data Customer Support Department for:  Product support or training  Information on upgrading or returning a product  Reporting comments or suggestions concerning manuals A Customer Support representative may be reached at: C…

68, Multi-Band Transceiver System Revision 0 Faults/Events MN/MBT4000B.IOM B-3 Table B-4. BUC-4000 Summary Faults Mnemonic Type Description 15V SUP Summary Fault The 15 volt power supply is out of tolerance. 5VT SUP Summary Fault The 5 volt power supply is …