Alpermann+Velte RUBIDIUM Installation Manual

27, Installation & Systems Manual RUBIDIUM SERIES Page 27 2.1.4 The “RUB1 Q1” Frame The RUB1 Q1 is a rack mount frame in 19”/1RU space with an 8-digit display. Chassis The RUB1 Q1 mount frame was designed to house up to two additional rear loading RUB1 modules in 1RU spa…

32, Alpermann+Velte RUBIDIUM Installation & Systems Manual RUBIDIUM SERIES Page 32 2.2 RUBIDIUM SERIES 3 Modules belonging to RUBIDIUM SERIES 3 are denoted as RUB3 modules. 2.2.1 The “RUB3 H3” Frame The RUB3 H3 mount frame provides capacity for 21 slots in 19”/3RU space. Some RUB3 modules require two s…

71, Installation & Systems Manual RUBIDIUM SERIES Page 71 3.36 SI: IRIG Monitoring and Changeover Unit This module can frame accurate and in real-time compare and contrast two incoming IRIG time code signals for indescribable differences. In the event of a failure, “SI” automatically …

88, Installation & Systems Manual RUBIDIUM SERIES Page 88 Load Profile Profile Select a number or a name from the drop-down list, then click on the “Load Profile“ button to load the profile. This will interrupt the operating mode of the module. The current set-up of the module will be…

61, Installation & Systems Manual RUBIDIUM SERIES Page 61 3.26 VI: LTC or IRIG Distribution Amplifier This module distributes and amplifies one input to six LTC (EBU/SMPTE) or IRIG time code outputs. A seventh spare output stage together with a change-over relay at each of the six outputs…

14, Installation & Systems Manual RUBIDIUM SERIES Page 14 Electro Static Discharge (ESD) Precautions All semiconductor devices are sensitive to ESD. To prevent any damage or degradation on components of the product caused by ESD, observe these precautions when directed to do so (installing,…