AMCON EQ-6001 Operation & User’s Manual

7, Objective Lens Bearing Seat (Fig. 10) This while nylon part securely supports the surface of any shaped lens without damaging the lens surface. The objective lens is shown below. There are three lock screws. Fig. 10 Diopter Measuring Handwheels (Fig. 11) The diopter measurin…

9, 8 Points for Attention in Operation  An observer who has relatively high refractive error should wear the appropriate spectacle or contact lens correction while using the lensometer.  Among the green dividing lines, the two lines are spherical marking lines and the three lines ar…

5, Reading Division Board (Fig. 5) In (9) eyepiece’s field of vision, the reading window is in the lower part of (8) eyepiece reticule. The range of reading (8) eyepiece reticule is +/-25D. The graduations between 0 and +/-5D are at an interval of 0.125D. Those between +/-5D and …

2, AMCON EQ-6001 CONTENTS Description and Usage............................................................................................................................................2 Main Technical Index...............................................................................................…

4, Fig. 1 – Diagram of Optical Principle (1)Light Source (2)Color Filter (3)Marker Reticule (4)Measuring Objective Lens (5)Diaphragm (6)Prism Compensation Device (7)Objective Lens (8)Eyepiece Reticule (9)Eyepiece (10)Reading Division Board (11)Reflect Lens (…

6, Lens Pressing Unit (Fig. 7) Three plastic pressing feet with springs are used to so that the surface of the lens can be pressed without the lens surface being damaged. To operate, lift the lens pressing bracket so that the lens pressing unit lowers to press the lens. After use, raise the lens …