Mace MVC-PTZ-23X Product Manual

24, 24 z FOCUS MODE: There are two modes: Manual/Auto. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z ZOOM SPEED; The zoom speed value ranges from 1 to 8. The bigger the value, the faster the speed. Please use the left/right button on the keyb…

17, 17 Figure 3-3 Note: Please use shielded twisted pair. The shielded layer shall connect to GND firmly; otherwise it may affect communication or video work. 3.2.1.2 Star Connection Please refer to Figure 3-4 for start connection information. Figure 3-4 3.2.2 Alarm Con…

35, 35 5 FAQ 5.1 Daily Maintenance Please clean dome cover regularly to get vivid image. Handle the cover with care. Use water to wash. Don’t use cloth to clean. Use mild detergent to clean if there is too much dust. Note: The sweat from your hand may erode plating surface, your nail ma…

33, 33 ALARM NO ：01 ACTION ：NONE CONTACT ：N/O PRESET ：001 AUTO SCAN ：001 CRUISE ：001 RELAY OUT ：OFFS RESET DELAY ：3S SAVE BACK EXIT • PRESET: The speed dome will go to the selected preset at the specifie…

16, 16 z When the activation mode is NC (normal close), dome alarms when there is high voltage. Low voltage will not activate the alarm. Note: z Dome alarm input message is ground mode. z Dome alarm input signal are two modes: normal open and normal close. 3.2.1 System Lay…

27, Mace MVC-PTZ-23X 27 PRESET NO ：001 TITLE ：PRESET001 SETTING CALL BACK EXIT z PRESET: Move the cursor to PRESET and then click confirm button to go to the third submenu. z PAN: Move the cursor to PAN and then click confirm button to go to the third submenu. z SCAN: Move the curs…