Onwa KV-300 Operator's Manual

6, Onwa KV-300 2 1.2.3 Automatic Transmitter Identification System (ATIS) Your marine transceiver may activate, if necessary, the ATIS function. The ATIS function may be activated when using the transceiver within the internal navigable waters of Europe which require the automatic transmission of id…

21, 8.5 Sending Group calling (Group Call) This function allows the user to call a specific group of stations which have the same MMSI group code stored in their transceivers and which signals the audio channel the user wishes to speak on. Therefore you can only carry out the group call when you …

20, 8. DIGITAL SELECTIVE CALLING (DSC) 8.1 Introduction Digital Selective Calling is a semiautomatic method for controlling VHF, MF and HF radio calls. It was also designed as part of the Global Marine It is likely that DSC will eventually replace audio calls on emergency frequencies an…

4, 8. DIGITAL SELECTIVE CALLING (DSC) 16 8.1 Introduction 16 8.2 Mobile Marine Identification Service (MMSI) 16 8.3 Navigating the DSC menu 16 8.4 Individual call (ROUTINE TO) 17Sending 8.5 Group calling (Group Call) 17Sending 8.6 General call to all ships …

12, 4.2 Location for the transceiver Before continuing, look for a place to install the transceiver which: Is far enough away from any device sensitive to magnetic/electromagnetic fields (e.g. compass) in order to avoid interference during their use. Allows for acc…