VAST DMC-1113 Operation & User’s Manual

15, 8. Move the cross line and select the second point of calibration. When the “calibration succeeded” Tip appears, calibration is completed and the indication will show 1.00mm (or 10.00mm) on the left corner of the downside of screen. (According to your selection, the distance betw…

6, 11. If the object is lumpy or a higher magnification (bigger image) is unnecessary, lift VAST digital microscope a little bit and adjust the focus knob to the right slightly until a clear image shows up. 12. If the object is too dark or bright, adjust the light knob to get the light you ne…

9, Brightness and contrast Click the icon on tool bar to select the brightness and contrast level. Set the brightness level to the default value from driver. You may use the scroll bar on the below to adjust the level for brightness. Set the contrast level to the default valu…

11, VAST DMC-1113 Select an video effect to add in the real-time video screen, the selected effect will be added in the video screen. It will appear in the photo snapshot and video recording. Special function - Time Record 1. Click the icon on tool bar. 2. Click the icon. Specifications …

7, 14. Use hardware snap button to capture image. Application Software Start Click 【VP-EYE 6.0】 Then image will show up. Specifications subject to change without notice. …

13, 2. Click the icon. 3. Click the right button of the mouse on tool bar, and quick menu will show up. There has “Ruler” can be selected. 4. Select “Ruler”. The default setting is “pixel”. Please follow below steps to change the measurement unit to “mm”. Specificati…