MARTINDALE MM65 Instruction Manual

1, MM65 MULTIMETER INSTRUCTION MANUAL GENERAL SAFETY INFORMATION: Always read before proceeding. Warning These instructions contain both information and warnings that are necessary for the safe operation and maintenance of this product. It is recommended that you read the instructions carefully and…

2, 2. PRODUCT SPECIFIC SAFETY INFORMATION Measurement Category III (CAT III) is applicable to test and measuring equipment connected to the distribution part of the building’s low-voltage MAINS installation. Measurement Category IV (CAT IV) is applicable to test and measuring equipment connected at …

3, To manually select a range press the RANGE button to hold the present range, then continue to press the RANGE button until the required range is selected. The sequence is lowest range to highest then directly back to lowest. To return to autoranging hold the RANGE button for 2 secon…

4, 4.4 Calibration To maintain the integrity of measurements made using your instrument, Martindale Electric recommends that it is returned at least once a year to an approved Calibration Laboratory for recalibration and certification. Martindale Electric is pleased to offer you this service. Ple…

5, MARTINDALE MM65 AC CURRENT (50Hz to 500Hz) Ranges: 340μA, 3400μA, 34mA, 340mA, 10A * Resolution: 0.1μA, 1μA, 0.01mA, 0.1mA, 0.01A Accuracy: 340μA to 340mA ranges ± (2.5% of rdg + 5 dgts) 10A range ± (3.5 % of rdg + 5 dgts) * * Current on 10A range applied for 60 seconds max followed by a 10…