AUSTRALIAN MONITOR integrator racks Installation And Operation Manual

9, 11 Mounting the top to the side panels With the fan tray and corners removed from the top piece you can use the 8 x M8x25 hex bolts supplied in the accessories to mount the top to the side frames. It is easiest to remove the inner panel from the side frames for this step as shown. Ensure th…

12, AUSTRALIAN MONITOR integrator racks ENGINEERED BY AUSTRALIAN MONITOR Address: 1 Clyde Street, Silverwater, Sydney NSW 2128 Australia. Private Bag 149, Silverwater NSW 1811 ABN 78 001 345 482 Website: www.australianmonitor.com.au International enquiries email: [email protected] DISTRIBUTED IN AUSTRALIA AND …

2, 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do no…

7, 6 Mounting the front/rear locks The locks and key sets will now need to be mounted to the front and rear door. NOTE: It is easiest to lay the door on a flat surface with pressure on the lock when doing this and step 6 and 7. The lock has two screws in the centre of the lock tha…

11, INT18 INT32 INT45 Dimensions in mm 600 x 800 x 1050 600 x 800 x 1620 600 x 800 x 2200 (W x D x H) (On Wheels) 23.6” x 31.5” x 41.3” 23.6” x 31.5” x 63.7” 23.6” x 31.5” x 86.6” Net Weight 57.0 Kg 82.0 Kg 102.0 Kg 125.4 lb 180.4 l…

5, 2 Mounting the lock catches The lock catches mount to the underside of the top piece. The mount with the flat side facing the outside of the rack as per the diagram. With the accesories there is a small bag of screws that contains 4 x M5x10 self tapping screws and 4 x M4x8 self tapping screws.…