MiCam High Definition Video Camera Operation & User’s Manual

12, Output Connection USB Picture1 Picture2 Connect to PC via USB Connect USB to the Digital interface of camera and USB port on the PC. (Refer to picture1) Connect to power source 1. Connect the power line to DIGITAL interface of camera, power light (Red) is on when it is connec…

18, White Balance Setup Choose different white balance value under different conditions. Default is AUTO. ● AUTO ● D4000 ● D5000 ● Sunny ● Cloudy ● Fluorescent ● Incandescent AE Meter Mode Choose different light metering mode Default is Average. ● Average ● Center ●…

4, Table of contents SYSTEM SETTINGS Setting Operational Approach Resolution Setting Quality Setting White Balance Setup AE Meter Mode Record Mode Setting Split Mode Setup Record Overwrite Setting Car Mode Stop Recording Delay Setup Motion Detection Setting External MIC VOL Setting Int…

8, 4 Basic Operations REC Picture1 Picture2 Picture3 Recording Instructions 1.Press [] key and hold for 2 seconds to power up the camera. 2. Adjust the lens to the proper angle. a) Face a blank surface and press [] to turn on the lasers ( The lasers will disappear in 15 seconds). The las…

9, Basic Operations Picture1 Picture2 Start / stop Recording Via Wired Remote Press [] key ( hold for 2 seconds ) to power up the camera. 1. Connect wired remote to the DIGITAL interface of camera (Refer to picture 1) 2: Press RECkey on the wired remote to start recording, recording indicator …