Sherwood AX-5505 Operating Instructions Manual

13, 13 Specifications • Power output, 8 Ω, THD 0.3 %, 40 Hz~20 kHz | 2 X 100 W • Total harmonic distortion, 8 Ω, 100 W, 1 kHz | 0.02 % • Intermodulation distortion 60 Hz : 7 kHz = 4 : 1 SMPTE, 8 Ω, 100 W | 0.05 % • Input sensitivity, 47 kΩ PHONO …

3, ENGLISH 3 CONTENTS Introduction • READ THIS BEFORE OPERATING YOUR UNIT | 2 System Connections | 4 Front Panel Controls | 6 DIGI LINK III System Remote Controls | 7 • REMOTE CONTROL OPERATION RANGE | 8 • LOADING BATTERIES | 8 Operati…

9, Sherwood AX-5505 ENGLISH Operations LISTENING TO A PROGRAM SOURCE 9 Before operation • Enter the standby mode. • The STANDBY indicator lights up. This means that the amplifier is not disconnected from the AC mains and a small amount of current is retained to support the memorized contents …

7, ENGLISH 7 DIGI LINK III System Remote Controls • You can remotely control not only this amplifier but also Sherwood compatible components bearing the DIGI LINK II or III logo. • For system remote control operation, first make the DIGI LINK connections. • In the DIGI LINK III remote control …

1, AX - 5505 OPERATING INSTRUCTIONS MANUEL D'UTILISATION BEDIENUNGSANLEITUNG ISTRUZIONI PER L’USO MANUAL DE INSTRUCCIONES Stereo Integrated Amplifier Amplificateur intégré stéréophonique Stereo-Vollverstärker Amplificatore lntegrato Stereo Amplificador Integrado Estéreo …

11, 11 RECORDING Recording with TAPE 1/MD Recording with TAPE 2 MONITOR • The volume and tone (bass, treble) settings, etc. have no effect on the recording signals. • Be sure that the TAPE 2 MONITOR indicator goes off. • When the TAPE 1/MD is selected as recording sources, dubbing …