MIMAKI APC-130 Manual, Quick Reference

1, MIMAKI APC-130 D202231-10 Table of Contents CAUTION.................................................................................. 2 Safety Precautions.................................................................. 3 Suitable Place for Installing APC-130 ................................... 5 Main Body Size…

6, - 6 - Main Body Size and Area Required for Installation The main body size of APC-130 and the area required for installation is as below: Outside dimensions of APC-130 Width Depth Height Gross weight 1825mm 700 to 1110 *1 mm *1.Size when the sheet basket of the front and the rear…

5, - 5 - Suitable Place for Installing APC-130  Prepare the place where meets conditions below: A place exposed to direct sunlight On an inclined surface A place gets dusty A place that vibrates A place exposed to direct air flow from an air conditioner or the like Around a pla…

9, - 9 - When the sheet is misaligned (continued) Check whether the sheet is set prop- erly. (3) Check whether you perform pre-feed Be sure to perform pre-feed. Roll sheet may expand or shrink not a little due to the environment change by changing its status of being taken-up to sagging. B…

14, - 14 - The motor alarm and the over current have occurred An error has occurred because too much load was applied to the motor to feed the media (A motor) and the motor to move the pen (cutter blade) right and left (B motor). (1) If Error 40 A motor alarm and Error 42 A over current are di…

8, - 8 - When the sheet is misaligned (continued) Check whether a piece of paper is not wound on the grit roller. After removing the clogged sheet etc., a piece of paper may be wound on the grit roller. Turn OFF the power supply, and rotate the grit roller manually to remove the paper. At th…