Simple Sign LED Kit H/T Installation And Operating Manual

13, 13 11. The time base correction value blinks (in steps of 50 ms). Modify with the [+] button. The time difference is taken into account whatever synchronisation mode is used (including radio). 12. Press the [S] button to validate the difference and to go on to the choice of synchronisation …

16, Simple Sign LED Kit H/T 16 V - Installation recommendations A - Brightness As far as possible, avoid placing the display unit near direct light sources (street lamps, etc.) to avoid interference with the automatic brightness adjustment. B - Installation principle If a non-reflective pane is used in front of the LED …

15, 15 IV - Technical specifications Models • Single-sided display line (SS) with control by 2 buttons on the box. • Secondary display line for double-sided mode (DS). • Available in 15, 20, 25 or 30 cm sizes, in red or yellow, in SS or DS. • Optional HF radio control console. F…

2, 2 Table of contents I - General description ...................................................................... 3 II - Electrical installation .................................................................... 4 III - Settings menu ........................................................…

10, 10 D - TECH menu : technician 1. Enter the TECH menu (see page 6). 2. The 24 (or 12) hour clock time display mode blinks. Modify with the [+] button. 3. Press the [S] button to validate the mode and to go on to the adjustment of the day/month order. 4. The day/month or month/day order bli…

6, 6 Temperature probe The temperature probe must be placed in a well-ventilated location protected from the sun and rain, preferably at the bottom of a totem. The position for the probe must always be carefully selected to ensure that a correct temperature reading is obtained. Avoid south-…