Sitecom DC-202 Full Manual

30, 30 4.5.6 SNMP Setting In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a user the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events. Enable SNMP You must check either Loca…

28, 28 4.5.4 Logs This page support two methods to export system logs to specific destination by means of syslog(UDP) and SMTP(TCP). The items you have to setup including: IP Address for Syslogd Host IP of destination where syslogs will be sent to. Check Enable to enable this function…

19, 19 5. Depending on the chosen provider, you may need to enter your user name and password and MAC address or hostname in the following window. Then click on Next. 6. Click Reboot to complete the configuration. 7. The configuration is now completed. 8. Click OK to…

55, Sitecom DC-202 55 b. In the Gateway tab, add the IP address of this product (default IP is 192.168.123.254) in the New gateway field and click Add button. c. In the DNS Configuration tab, add the DNS values which are provided by the …

20, 20 10. The router will now connect to the Internet. 4.4 Basic Setting 4.4.1 Setup – Manual configuration Press “Change” …

10, 10 2.1.2. Rear Panel Ports: Port Description PWR Power inlet WAN the port where you will connect your cable (or DSL) modem or Ethernet router. Port 1-4 the ports where you will connect networked computers and other devices. Reset To reset system settings to factory defau…