Sokan KIRK DELTA S1 Operation & User’s Manual

23, 23 8 Troubleshooting Problem Solution The telephone does not ring. The switch no. 3 under the cover on the left side of the subset has to be placed in position ON . The telephone / microphone is very sensitive according to noise in teh surroundings. See chapter 6.2; Si…

18, 18 5.1.3 Call forwarding (only for DELTA TRIO) To use the easy way of Call Forwarding the memory keys has to be programmed for EkstraService or DuetServices. Enable Call Forwarding when TsS services are programmed: 1. Press the Viderestilling - key. The display show *21* and the num…

10, 10 2.3.2 Volume regulation The received signal in the handset and the loudspeaker can be regulated by means of the wheel in front of the subset. The level of the received signal will remain until next time the wheel is moved. 2.3.3 Microphone mute 1. Press the - key. The - symbo…

14, 14 4.2 Erase a number in the Caller ID memory 1. Press the LIST - key and the last received number is showed in the display. 2. Use the - key and the - key to find the number in the list which has to be deleted. 3. Press the - key two times to delete the entry. The…

4, Sokan KIRK DELTA S1 4 1 Layout of the telephone Symbols in the display New messages on the exchange board * The batteries is almost used Call waiting is enabled (only DELTA TRIO) The telephone is in programming mode Call barring is enabled (only DELTA TRIO) Call forwarding is enab…