Ace Plus EX-G048A Manual, Datasheet

2, Safety and Notice The EX-G048A 1x3 DVI Splitter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, EX-G048A should be used with care. Please read and follow the safety inst…

10, Operation- Single Device Long line Short line Monitor 1 Monitor 2 Monitor 3 1. If monitor 2 needs to be turned off, then follow the instruction below. 2. Press “CH” to enter to the channel selection mode. 3. Press “2” to make channel 2 (output 2) selected and then press “on/off�…

6, Ace Plus EX-G048A Bottom Panel Mode On Open EQ. Less noise but more power consumption. 1 Off Close EQ. On Writing default EDID. *Set the DIP switch at on and plug in power cord. The green LED will light after the writing process is completed. 2 Off Record EDID of the connected display via …

9, Remote Control 1. Turn on/off all devices (ID) and channels (CH). 2. ID selection mode. Press up or down arrow button to select an ID. Once the ID selected matches the ID of the EX-G048A, green LED lights. 3. Channel selection mode. Press this button before you would like to …

11, The SELLER warrants the EX-G048A 1x3 DVI Splitter to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The …