Pima Captain 6 Operation & User’s Manual

8, CAPTAIN 6 User Guide 8  To identify the zone that is the cause of the alarm: The letter A is displayed above any Alarm Zone that was triggered while the system was last armed.  To enable the Chime mode: Press and hold . The message CHIME ON is displayed for about 3 sec…

14, CAPTAIN 6 User Guide 14 FAULTS INDICATIONS Display Description Battery Low battery power 1 Phone No dial tone detected 2,3 AC line AC power failure 2 Clock Appears after initial power input or after total power reset (AC and battery) 4 Low DC Very low …

11, Pima Captain 6 CAPTAIN 6 User Guide 11  To program User Code #1: [ Master Code [ [ [ [ new User Code (4-6 digits) [ [ [ .  To delete User Code #1: [ Master Code [ [ [ [ [ [ .  To program User Codes #2 to #8: [ Master Code [ [ (as many times as …

7, CAPTAIN 6 User Guide 7 NOTE:  User can arm/disarm only partitions allocated to him by the installer (partitions #1, #2, or both).  All keypads connected to the system share the same display, even if they are allocated to different partitions. IMPORTANT! If the…

13, CAPTAIN 6 User Guide 13  To delete telephone number(s): [ Master Code [ . With the telephone number(s) to keep [ and with the one(s) to delete [ [ to exit. NOTE: To delete all the telephone numbers, [ Master Code [ [ x3 [ .  To set the time and date for …

16, CAPTAIN 6 User Guide 16 PIMA Electronic Systems Ltd. does not represent that its product may not be compromised and/or circumvented, or that the Product will prevent any death, personal and/or bodily injury and/or damage to property resulting from burglary, robbery, fire or otherwi…