WizWheelz TerraTrike 3.21 Owner's Manual

7, handlebar stays parallel with the outrigger tubes of the frame during these adjustments. Measure the distance between the frame and the leading edge (A), and then the trailing edge (B) of one wheel. Adjust that wheel's tierod until these measurements are the same. This will gi…

2, Cautions/Safety: Stop! Make sure to read and understand this manual completely before riding your TerraTrike. We want to keep you riding your TerraTrike safely for endless miles and years to come. So, always follow these safety precautions for each ride: >- Inspect your TerraTrike ea…

13, Step 10. Attaching the seat: First put the end caps in the seat frame. Then attach the seat mesh to the seat frame. Insert the ends of the seat frame into the narrow pockets in the seat mesh. (See Fig. 19) Wrap the remaining part of the mesh (with the grommets) around to the…

16, by a qualified bicycle technician unless you have the necessary wheel truing skills. Brakes: The brake cables will stretch in the early life of the TerraTrike. This is a normal effect. To tighten the brake cables when they have loosened, turn the cable sleeve at the end of the cable ho…

6, WizWheelz TerraTrike 3.21 Step 5. Handlebar adjustment: Attach the steering brace to the frame using the nut and washer supplied. Loosen the bolts in the steering clamp. Set the handlebar up so the grips are pointing straight up (perpendicular to the floor). This is a good place to start, but you may want…