System Level Solutions NEEK Board Support Package uClinux Operation & User’s Manual

28, Configuring Device Drivers and File Systems uClinux NEEK BSP 4.2 Flash Memory (MTD) Driver To include the Flash Memory (Memory Technology Device) driver in compilation, the following options should be enabled: Device Drivers ---> Memory Technology Devices (MTD…

14, uClinux NEEK BSP Development Environment uClinux NEEK BSP Figure 2 : Development Environment uClinux BSP Applications RED HAT uClinux Nios II IP Cores NEEK BSP SOPC System Host Target NEEK Board Ethernet Serial 2.2.1 NEEK BSP Components Table below lists the components included in the …

13, 2. uClinux NEEK BSP Development Environment This chapter provides information to help setup the development environment for the NEEK board. 2.1 NEEK BSP SOPC System The Figure 1 below shows the block diagram of NEEK BSP SOPC system. Figure 1 : NEEK BSP SOPC System VGA C…

1, uClinux NEEK BSP User Guide NEEK BSP Version: 2.0.0.0 Document Version: 1.5 Date: September 2008 System Level Solutions, Inc, (USA) 14100 Murphy Avenue, San Martin, CA 95046 (408) 852 - 0067 System Level Solutions, (India) Pvt, Ltd. …

52, Debugging Kernel and User Application uClinux NEEK BSP • Select workspace>Helloworld>Debug>Helloworld and copy the file into /uclinux-dist/romfs/bin. e) Build the zImage as explained in early section. f) Click OK. 10. Now, select Project-->Build project to compi…

38, System Level Solutions NEEK Board Support Package uClinux Network Utilities uClinux NEEK BSP miscellenieous application --> --- Audio tools [*] mp3play Build the zImage with these options. To test this application, copy the MP3 songs in SD card and run the zImage, when it is up and running. Mount the…