Coolcam NIP-32 Operation & User’s Manual

14, IPCAM User Manual 14  Refresh Camera List Refresh camera list manually.  Flush Arp Buffer When cable network and wireless network of the device both are fixed IP address. T…

54, IPCAM User Manual 54 Step4: Open the link to active your Domain Name as below.Login in your account after it is activated . Figure107 Step5: Check all the DDNS services,we choose the 14-day-trial …

43, IPCAM User Manual 43 Note: the third party domain name is the realization of analytical way, input the domain in the browser, it will keep this string of characters. If the port of the device …

48, IPCAM User Manual 48  Send E-mail alarm informatio  Transmit pictures to the FTP server, and can set the time interval of sending pictures; 2) Alar m t ime Settings Only in the alarm period,…

46, IPCAM User Manual 46 3.Start Server Continue to finish it ： Picture 89 4．IPCAM’S account can be used. Picture 90 Save path This is a FTP server address …

49, Coolcam NIP-32 IPCAM User Manual 49 Picture94 IO Linkage on Alarm Enable IO linkage on alarm,Pin1 will output +5V when alarm triggered, and output LOW when alarm release automatically. Switch on/off …