Ziton ZP2-F Series Operation Manual

17, Test Tests are indicated as follows: • The General Test LED is steady • If a zone board is installed, the corresponding zone Disabled/Test LED is steady (if the corresponding zone is included on the zone board) • The control panel buzzer sounds intermittently (short tone)…

13, Indication of remote and local events on the LCD The local control panel ID is always displayed on the LCD (see Figure 2 on page 7). If your control panel forms part of a fire network, the event notification includes the panel ID reporting the event as follows: • If the panel ID matches …

21, Ziton ZP2-F Series Note: A fire alarm activated by a manual call point overrides any configured delay and activates fire routing or fire protection immediately (if configured). Viewing current events To view current event information, press F1 (Show events) and then select the event type to view. The event t…

8, Front panel controls and indicators The following table gives an overview of the front panel controls and indicators. Operational features described here are not available to all users. Further information on control panel operation and access restrictions can be found in the to…

18, Control panel operation User levels Access to some of the features of this product is restricted by the user level assigned to a user account. Public The public level is the default user level. This level allows basic operational tasks, such as responding to a fire alarm or fault…