Sky Master A10 arf pro Assembly And Operation Manual

10, Assembly & Operation Manual OPTIONAL PARTS P-10 Landing Gear Set 3 x Air Tanks 1 x Retract Valve 2 x Filler & 2 x Pressure Gauges 1 x br…

21, AIR DIAGRAM P-21 Assembly & Operation Manual Photo 39 Diagram for retracts  For scale functions such as canopy you will require additional 2 way electronic valves. Photo 38 2 way …

18, Assembly & Operation Manual POD + TAIL PIPE (Note the angle of tail pipe)  Fit the POD to fuselage and glue with 30 min epoxy.  Open the hatch and fit the tailpipe. Use turbine to space the pipe. Photo 33 FUEL CELLS NOTE: Bad plumbing lead to flame outs. This wi…

14,  Make up flap pushrod. Make up 4.  Fit pushrod to servo horn (long horns) and secure safety clip.  Mark location on glass flap horn.  Mill slots for 2 horns and glue horns with 30 minute epoxy.  Slide pushrod through hole in trailing edge…

7, Sky Master A10 arf pro Assembly & Operation Manual HEALTH Use a mask (available at auto paint stores) to protect from inhaling the glass or carbon fiber dust. Use this mask whenever you are sanding or cutting fiberglass or carbon fiber materials. Use a charcoal filter paint mask (available at a…

25, BEFORE YOU FLY P-25 Assembly & Operation Manual It is assumed that the builder of this kit has acquired the basic skills and knowledge necessary to make a safe and functional radio control installation into a model. Therefore, these note…